Transom-Mounted Hydraulic Azimuth Thruster

Transom-Mounted Hydraulic Azimuth Thruster

Transom-mounted units are ideal for applications where sufficient freeboard is available.  They can be welded to the transom or sides of vessels, barges or platforms.  Frequent immersion from wave action is no problem.  The engine and hydraulic power unit may be installed on deck or in an engine room at any convenient location.  A single engine may power multiple transom-mounted thrusters.

Summary
transom mounted thruster Transom Mounted Hydraulic Azimuth Thruster
Propulsion Rating
1star Transom Mounted Hydraulic Azimuth Thruster 1star Transom Mounted Hydraulic Azimuth Thruster 1star Transom Mounted Hydraulic Azimuth Thruster 1star Transom Mounted Hydraulic Azimuth Thruster 1star Transom Mounted Hydraulic Azimuth Thruster
Aggregate Rating
5 based on 2 votes
Brand Name
Thrustmaster
Product Name
Transom-Mounted Hydraulic Azimuth Thruster
Product Availability
Available in Stock

Options and Features

The “Thrustmaster” is recommended for dynamic positioning applications, double-ended river ferries and similar applications where thru 360 degree steering is required. It uses a multi-port hydraulic swivel assembly and hydraulic motor powered slewing drives for steering. TILT - Hydraulic swing up of the outdrive leg LIFT - Vertical Hydraulic power depth adjustment

Technical Specs

Transom-Mounted Hydraulic Azimuth Thruster

Open Wheel Drawing List With Nozzle Drawing List
Model HP-Range Fixed Lift & Tilt Fixed Tilt Lift Tilt & Lift
OD35 0-50
OD50 25-75
OD75 50-100
OD100 75-125
OD250 100-150
OD150 150-200 B103486
OD200 200-250 B105704
OD250 250-300 C107155
OD300 300-350 C107155
OD400 350-450 D101906 D103804
OD500 450-550 D101654
OD600 550-650
OD750 650-800
OD850 800-900 B108210
OD1000 900-1100 B105418 B105232
D107432
B105426
OD1500 1000-1600 D107440
OD1800 1500-1900 D107441    
OD2000 1800-2000

WORKMASTER Transom-Mounted AutoCAD Drawings

The “Workmaster” is recommended for general propulsion applications. Since the propeller can run in reverse as easily as it runs in forward mode by virtue of the over-center hydrostatic transmission drive, the “Workmaster” is capable of directing thrust in any direction of the compass. It uses a hydraulic actuator for steering and is simpler and less expensive than the “Thrustmaster”. TILT - Hydraulic swing up of the outdrive leg LIFT - Vertical Hydraulic power depth adjustment

Open Wheel Drawing List With Nozzle Drawing List
Model HP-Range Fixed Tilt Lift Lift & Tilt Fixed Tilt
WM35 0-50
WM50 25-75 B101944 B103544
WM75 50-100 B103454
WM100 75-125
WM250 100-150
WM150 150-200 B103874 C102662 C103472 B107411
WM200 200-250 B103573
B103612
B105408
WM250 250-300
WM300 300-350 B104792
B107714
B105731
WM400 350-450 B104581 D103482 C103335
WM500 450-550 B103274
WM600 550-650
WM750 650-800
WM850 800-900
WM1000 900-1100 B104399